1. Key Technical Specifications Working pressure: 0~2900KPa G (range can be adjusted) Accuracy: ±1.6%FS (-40℃~+140℃) Another high-precision version is available Operating temperature: -40℃~+140℃ Storage temperature: -40℃~+150℃ Safety pressure: 50bar@1H Burst pressure: 100bar@30s Working medium: oil Service life: three million full range cycles Vibration: 10g (50~2000Hz) Protection level: NA Case material: A6061-T6 Pressure connection: 2×∮8.22±0.03 Supply voltage: 5.0±0.25VDC Output range: 193~3896 (adjustable in 5V range) Power supply current: <20mA Output load: 3KΩPULL-DOWN Output response time: ≤10ms(T90) Short circuit protection: Yes 2. Core Function Real-time track ATF hydraulic pressure during shifting and send continuous accurate pressure data to TCU. The TCU adjusts the output pressure of shift solenoid valves based on sensor signals to achieve smooth upshifts and downshifts without jitter. Maintain stable main oil pressure under various driving conditions including acceleration, climbing and high-speed cruising to protect clutches and friction plates. Built-in self-diagnosis function identifies abnormal oil pressure, open/short circuits and oil leakage, activates gearbox fault indicator lights and stores DTC fault codes. Assist the transmission system in adaptive learning and optimize shift logic to extend the service life of internal transmission components. 3. Working Principle This sensor applies high-stability piezoresistive sensing technology: Automatic transmission fluid pressure presses the corrosion-resistant metal sensitive diaphragm to produce tiny elastic deformation. Strain resistors integrated on the diaphragm generate resistance changes linearly proportional to oil pressure. A Wheatstone bridge converts resistance variations into analog voltage signals. Internal signal amplification, filtering and ADC modules eliminate interference caused by oil temperature, output stable analog or digital signals to the TCU. 4. Application Scope Vehicle Types Vehicles equipped with AT, DCT, CVT and AMT gearboxes, including fuel cars and hybrid electric vehicles. Equipment Passenger cars, SUVs, MPVs, light commercial vehicles and construction machinery with automatic transmissions. Application Scenarios Daily passenger vehicles, hydraulic control systems of hybrid gearboxes, auxiliary intelligent shifting systems.